NEWS

1. Can this equipment respond instantly to process changes during coagulation treatment? If so, how long does it take to respond? For example, if turbidity readings are high/low, can the unit automatically adjust the injection of coagulant/flocculant metering pumps?

1、Analysis Not Started

Description: Instrument has not initiated measurement.

Troubleshooting Steps:

1. Check if an interval time is set.

2. Check if external signal control for measurement is enabled.

3. Verify if the instrument is set to automatic mode.

4. Contact Jiepu Instruments technical support for assistance in verifying correct instrument configuration.

1.   Failed to reset the remaining reagent level after installing or replacing new reagents.

2.   Alarm persists after reset and restart; replace the SD card directly.