Jensprima online hardness and residual chlorine analyzers play a vital role in the service life of reverse osmosis membranes and the water recovery rate within pharmaceutical RO systems.
Free Chlorine Total Chlorine Analyzer
PACON 2501
Free Chlorine Total Chlorine Analyzer
FlumPANEL 2501
Dual-Parameter Water Quality Analyzer
Flumsys 10TC-F1P1
Water Quality Analyzer
Flumsys 10TC-F
Free Chlorine Controller
innoCon 6800CL
Free Chlorine Controller
innoCon 6501CL
Panel-mounted Online pH Analyser
pH/Redox Controller
innoCon 6800P
pH/Redox Controller
innoCon 6501P
The innoSens 815S probe is used for the optical measure of turbidity/TSS in pure and process waters up to
4000 NTU/2000 mg/l. The probe uses the 90° scattered light method.
Reliable concentration measurement using optical measuring process
Infrared light pulsing beams scattering method
SS304 sensor body
No mechanically moving parts
Measured value pre-processing in sensor resulting in low signal transmission
Immediate installation and easy manteinance
| Materials | SS304 Body;Special Glass Optics;NBR and Sylicon O-Rings |
| Thread | 1" GAS |
| Measuring Range | 0-4000NTU / 0-2000 mg/l |
| Measuring Method | 90° Scattered light |
| Accuracy | ± 5% of measuring value. |
| Repeatability | 98% |
| Calibration | by 3 points |
| Working Temperature | 0~45 °C |
| Max Working Pressure | < 2 bar |
| Maximum Absorption | 3W |
| Mechanical Protection | IP68 – cable included |
| Cable | 10m integral |
| Power Supply | 12~24Vdc |
| Outputs | RS485 Modbus RTU |
| Auto Cleaning | wipper |
| Cable codes | |
| V+ | 24Vdc + |
| V- | 24Vdc - |
| A | RS485 A |
| B | RS 485 B |
| 35-0815-01 | innoSens 815S Infrared Turbidity/TSS Sensor |
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


